Elios OBDII GPS Fleet Tracker    

Overview
The Elios OBDII CAN device provides you with
real-time location, driver safety alerts and certain vehicle diagnostics. Simple plug-and-play installation in a wide variety of vehicles, the device offers an array of features in an integrated, easy-to-use solution.

HIGHLIGHTS

  • High-precision GPS with real-time visibility
  • Works with light, medium, and heavy duty vehicles
  • Includes a complete hardware, software and cellular solution to enhance efficiency, security and safety.
  • Geofence alerts notify when vehicles arrive, passthrough and/or leave a specific location.
  • Trip History
  • Easily share live locations and geofences for a set period of time.

 

Features

Real Time and Buffer Locations

Real time location updates can be as frequent as 3s. Up to 60,000 location points can be saved in buffer if out of network coverage.

Plug & Play

No installation and maintenance needed.

 
 

CAN BUS reading

  • VIN
  • Odometer
  • Fuel Level
  • RPM
  • Diagnostic Trouble Codes

Driving Behaviour Detection

6 axis accelerometer for accurately detecting reckless driving events such as harsh acceleration, turning, braking and crash.

BLE 5.0 for Sensors

Compatible with Elios' BLE Sensors.

Door & temperature sensor

Relay sensor for anti-theft

Temperature & humidity sensor

 
 

Reckless Driving Buzzer

Internal buzzer for waring drivers when harsh driving behaviour occurs.

Disconnection Alerts

Alerts for device disconnected from power.

Battery Backup

Backup power for sending disconnection alerts when power disconnected

Ignition On/Off Alerts

Alerts for when the engine is turned on or off

Technical Specifications

Network/Operating Band

Operating Band: FDD: B1/B2/B3/B4/B12/B13/B17/B25/B28 TDD: B39 (Cat M1 only)

Data Transmission: eMTC: Max. 300Kbps (DL), Max. 375Kbps (UL) NB1: Max. 32Kbps (DL), Max. 70Kbps (UL) EDGE: Max. 296Kbps (DL), Max. 236.8Kbps (UL) GPRS: Max. 107Kbps (DL), Max. 85.6Kbps (UL)

 

GNSS Specifications

GNSS Chipset:Qualcomm Gen 8C GNSS receiver

Parallel GNSS:GPS+Glonass+Galileo+Beidou

Receiver Type:33 tracking / 99 acquisitions- channel GNSS receiver

Position Accuracy (CEP):Autonomous < 2m

Standalone TTFF:Cold start: < 29s
                                  Warm start: < 27s
                                  Hot start: < 1s

Interfaces

Connector:OBDII

CAN Data Reading:Yes

Support legislated OBDII protocols:J1850 PWM, J1850 VPW, ISO 9141-2, ISO14230, ISO 15765-4, J1939

SIM card slot:Nano SIM card slot

LTE/GNSS/Bluetooth Antenna:Internal only

Indicator LED:Network, Diagnostics and GNSS

FOTA:Yes

BLE (Bluetooth Low Energy):5.0

General Specifications

Dimensions:57mm*50mm*24mm (2.24” *1.97” *0.94”)

Weight:50g (1.76oz)

Backup Battery:Li-Polymer 120 mAh/ 3.7V

Operating Voltage:7V to 32V DC

Operating Temperature:-30℃ ~ +80℃ (-22°F ~ 176°F)

Storage Temperature:-40℃ ~ +85℃ (-40°F ~ 185°F)

Air Interface Protocol

Transmit Protocol:TCP, UDP, MQTT, SMS

BLE Accessory Support:Yes

Scheduled Timing/angle/distance Report:Report position and status at preset intervals

External Power Status Alarm:Report when external power is disconnected

Low Power Alarm:Report when backup battery is low

Speeding Alarm:Report when speed exceed the pre-set value

Network Signal Jamming Detection:Report network jamming

Data Roaming Control:Avoid additional data consumption

Driving Behavior Monitoring:Aggressive driving behavior detection, e.g. harsh braking and acceleration

Crash Detection:Accident data collection for reconstruction and analysis